Air Scrubber Large Volume
(AP Series)

The model designation of XPOWER air purifiers reflects their built-in technology modules:D: It adopts H13 HEPA and activated carbon dual filtration technology and is equipped with a powerful air volume, which can effectively improve the indoor air quality of large venues.U (UV-C): Added deep ultraviolet germicidal lamps, which destroy the DNA or RNA structure of bacteria, viruses and fungal spores passing through the equipment, rendering them inactive, making it suitable for places with strict requirements for the internal hygiene of the machine.PHI (Photo-hydro-ionization): This technology incorporates photohydrogen ionization for active purification. It uses broad-spectrum ultraviolet light to react with various rare metal catalysts, generating purification factors. Unlike the passive filtration of HEPA filters, PHI factors actively eliminate bacteria and odors from indoor surfaces (such as tabletops and doorknobs). It is suitable for spaces with high foot traffic and a risk of cross-infection.

Choosing the right air purifier requires an assessment based on factors such as room size, floor height, ventilation conditions, and pollution levels. Some spaces, such as clinics or renovation environments, require frequent air changes, necessitating the selection of models with a higher air change rate (ACH). For offices and everyday home environments, standard models can be chosen based on the room size.Air Change Rate (ACH) Considerations: Air Change Rate (ACH) refers to the number of times the air is changed per hour. CADR and ACH together determine the actual purification effect, especially in large commercial spaces and enclosed rooms, where balancing the two is crucial. In commercial environments, it is recommended that the air change rate (ACH) be no less than 4 times per hour. Based on a CADR of 1500 cubic meters per hour, in a space with a ceiling height of 3 meters, the maximum recommended effective coverage area is approximately 125 square meters (approximately 1,350 square feet).For different types of pollutants: some models perform better in removing odors, while others are more effective at removing smoke (fine particles). Therefore, when purchasing, you should refer to the actual source of air pollution in your home or workplace—whether it is PM2.5, odors, or dust—and then choose the corresponding model.Professional selection: Large or special spaces (such as medical institutions, kitchens, printing plants, etc.) not only require higher ACH, but also need to consider the configuration of the filtration system, the distribution of air ducts and the actual operating noise.We recommend consulting our professional team for accurate model recommendations and engineering support.

Pollution sources in industrial settings (such as welding fumes, oil fumes, chemical gases, and dust) are far higher than in general environments. Professional industrial air purifiers are equipped with specialized filter modules and large-capacity fan systems, providing powerful ventilation and continuous operation. We offer air purification systems for factory workshops, large commercial kitchens, printing plants, food processing facilities, and other locations, effectively solving VOC emissions and particulate pollution problems while meeting environmental and safety standards.

Yes. XPOWER air purifiers combine passive adsorption and active decomposition technologies to treat gaseous pollutants.Passive adsorption (activated carbon): The equipment is equipped with a large-capacity activated carbon filter, which physically adsorbs formaldehyde, benzene and other volatile organic compounds (VOCs) through its dense microporous structure.Active decomposition (PHI technology): This is the core of odor treatment. PHI technology utilizes the Advanced Oxidation Process (AOP) to generate highly active purifying agents (such as hydroxyl radicals -OH) in the air.Technical principle: The purifying factor can react chemically with gaseous organic pollutants, decomposing complex VOC molecular chains (such as formaldehyde HCHO) into harmless carbon dioxide (CO2) and water (H2O).Technical advantages: Unlike relying solely on filter adsorption, PHI technology can actively contact and decompose trace odor molecules in the space and even on the surface of walls, reducing the risk of odor residue.Although PHI can effectively decompose VOCs, for extremely high concentrations of renovation pollution, it is still recommended to use it in conjunction with physical filtration using activated carbon filters and ensure adequate fresh air circulation in the environment to achieve the best treatment effect.

Although the XPOWER large air purifier is large in size, its energy consumption is relatively stable.For example, the rated power of the AP1800D is usually between 150W and 250W .If it runs for 10 hours a day, it will consume approximately 1.5 - 2.5 kWh (kilowatt-hours) of electricity per day.Based on Hong Kong's average electricity price, the daily electricity cost is approximately several Hong Kong dollars, which is within the controllable range for commercial operations.

Industrial-grade equipment has a very large air volume, and when adjusted to the maximum air volume, the noise level will be higher than that of household units.Technical parameters: At the highest setting (Turbo), the noise level can reach 65dB ; when operating at a lower setting, it can be reduced to about 40dB .Recommendation: If used in a quiet office or classroom, it is recommended to choose a model with a larger air volume than actually needed so that the machine can run at a low speed for a long time and reduce noise.

The lifespan of a filter depends on the level of air pollution in the environment in which it is used.Pre-filterIt should be checked every month . If there is visible dust accumulation, it should be cleaned or replaced immediately.HEPA filterIt is recommended to replace it every 3,000 to 4,500 hours .Users can observe the pressure gauge . When the differential pressure value rises significantly to the upper limit set by the machine (indicating that the filter pores are severely clogged), the filter needs to be replaced even if the preset number of hours has not been reached, in order to maintain airflow.Activated carbon filterIt is recommended to replace it every 6 to 12 months .Activated carbon primarily works by adsorbing chemical odors and VOCs. If an odor is detected coming from the air vents, or in a newly renovated space (with high formaldehyde concentrations), the frequency of replacement needs to be increased accordingly.UV-C germicidal lamp tubeIt is recommended to replace it every 8,000 to 9,000 hours .A word of caution: Although UV-C lamps may still emit blue light after reaching their lifespan, the intensity of the radiation at the wavelengths required for sterilization will decrease significantly, rendering them ineffective in preventing disease. Therefore, it is essential to replace the lamps on time according to the operating timer, rather than waiting for them to burn out.